Ring Doorbell Installation Instructions 2023 | Ring Video Doorbell Setup and Installation Guide 8 Steps

Ring Doorbell Installation Instructions: Installing a Ring Doorbell is a relatively easy process that can be done by anyone with basic DIY skills. The following instructions will walk you through the steps involved in installing your Ring Doorbell, from choosing a location to connecting the wires.

Tools and Materials Needed:

  • Screwdriver
  • Level tool
  • Drill (if mounting to brick or stone)
  • Plastic anchors (if mounting to brick or stone)
  • Mounting bracket (included with Ring Doorbell)
  • Doorbell wires (existing or new)
Ring Doorbell Installation Instructions | Ring Video Doorbell Setup and Installation Guide 8 Steps

Ring Video Doorbell Setup and Installation Guide 8 Steps

Ring Video Doorbell Setup and Installation provide the infographic formate image and can you easily install Ring Video Doorbell at your home

1. charge the provided battery:

plug the battery in, the small light on top will glow green once fully charged

Capture

2. Set up your video doorbell in the ring app:

(insert the battery), after charging insert the battery in the bottom of your video doorbell untill is clicks into place

Capture 1
Capture 2

3. install your video doorbell:

Capture 3

4. select your install height

install video doorbell approximately four feet (1.20 metres) above the ground for optimal performance

Capture 4

5. remove your existing doorbell (optional)

dont have an in home chime

do you have an in home chime

insert the mini level

Capture 5

6. install the anchors (optional)

connect the wires (optional)

Capture 6

7. attach the wire extensions (optional)

Capture 7

8. install the faceplate and secure the faceplate

Capture 8

Ring Doorbell Installation Instructions by other 7 Steps

  1. Choose a location for your Ring Doorbell. The ideal location is at eye level, near your door, and in a well-lit area. Avoid areas that are exposed to direct sunlight or rain.
  2. Remove your existing doorbell (if applicable). Turn off the power to your doorbell at the breaker box. Disconnect the wires from the back of your old doorbell and remove it from the wall.
  3. Mark the holes for the mounting bracket. Use the mounting bracket as a template to mark the holes on the wall. If you’re mounting to brick or stone, use a drill to create pilot holes.
  4. Install the mounting bracket. If you’re mounting to wood, use the included screws to attach the mounting bracket to the wall. If you’re mounting to brick or stone, use the included plastic anchors to secure the mounting bracket to the wall.
  5. Connect the doorbell wires to the mounting bracket. Connect the doorbell wires to the terminals on the mounting bracket. Make sure to match the positive and negative wires correctly.
  6. Attach the Ring Doorbell to the mounting bracket. Line up the tabs on the back of the Ring Doorbell with the slots on the mounting bracket. Press the Ring Doorbell into place until it clicks.
  7. Turn on the power to your Ring Doorbell. Flip the breaker switch back on to restore power to your doorbell.

Once your Ring Doorbell is installed, you can download the Ring app to your smartphone or tablet to start using it.

Here are some additional tips for installing your Ring Doorbell:

  • Make sure the doorbell is level. This will ensure that you get the best possible video quality.
  • If you’re mounting the doorbell to a brick or stone wall, use a masonry drill bit to create the pilot holes.
  • If you’re connecting the doorbell to existing doorbell wires, make sure to disconnect the power to the doorbell at the breaker box before you start working.
  • If you’re not comfortable installing the doorbell yourself, you can hire a professional electrician to do it for you.

Additional tips:

  • Make sure the doorbell is level. This will ensure that you get the best possible video quality.
  • If you’re mounting the doorbell to a brick or stone wall, use a masonry drill bit to create the pilot holes.
  • If you’re connecting the doorbell to existing doorbell wires, make sure to disconnect the power to the doorbell at the breaker box before you start working.
  • If you’re not comfortable installing the doorbell yourself, you can hire a professional electrician to do it for you.

Once your Ring Doorbell is installed, you can enjoy the peace of mind of knowing that you can always see and speak to visitors at your door, even when you’re not home.

Read More:

Leave a Comment